| Description |
Cisco Catalyst 9115AX Series,H Domain |
| Software |
Cisco Unified Wireless Network Software Release 8.9 or later |
| Cisco IOS ® XE Software Release 16.11or later |
| Supported wireless LAN controllers |
Cisco Catalyst 9800 Series Wireless Controllers |
| Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
| 802.11n version 2.0 (and related) capabilities |
4x4 MIMO with four spatial streams |
| max Ratio Combining (MRC) |
| 802.11n and 802.11a/g beamforming |
| 20- and 40-MHz channels |
| PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) |
| Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
| 802.11 Dynamic Frequency Selection (DFS) |
| Cyclic Shift Diversity (CSD) support |
| 802.11ac |
4x4 downlink MU-MIMO with four spatial streams |
| MRC |
| 802.11ac beamforming |
| 20-, 40-, 80-, and 160-MHz channels |
| PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) |
| Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
| 802.11 DFS |
| CSD support |
| 802.11ax |
4x4 downlink MU-MIMO with four spatial streams |
| Uplink/downlink OFDMA |
| TWT |
| BSS coloring |
| MRC |
| 802.11ax beamforming |
| 20-, 40-, 80-, and 160-MHz channels |
| PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) |
| Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
| 802.11 DFS |
| CSD support |
| Integrated antenna |
2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth |
| 5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth |
| External antenna (sold separately) |
Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) |
| Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios |
| Interfaces |
1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) - IEEE 802.3bz |
| Management console port (RJ-45) |
| USB 2.0 (enabled via future software) |
| Indicators |
Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
| Dimensions (W x L x H) |
Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm) |
| Input power requirements |
802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®) |
| Cisco power injector, AIR-PWRINJ6= |
| 802.3af PoE |
| Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) |
| Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 1 Gigabit Ethernet. In addition, the USB port will be off. |
| Environmental |
Cisco Catalyst 9115AXI |
| Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) |
| Nonoperating (storage) altitude test: 25˚C, 15,000 ft. |
| Operating temperature: 32° to 122°F (0° to 50°C) |
| Operating humidity: 10% to 90% (noncondensing) |
| Operating altitude test: 40˚C, 9843 ft. |
| Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 4x4 to 2x2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet, and the USB interface will be disabled. |
| Cisco Catalyst 9115AXE |
| Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) |
| Nonoperating (storage) altitude test: 25˚C, 15,000 ft. |
| Operating temperature: -4° to 122°F (-20° to 50°C) |
| Operating humidity: 10% to 90% (noncondensing) |
| Operating altitude test: 40˚C, 9843 ft. |
| System memory |
2048 MB DRAM |
| 1024 MB flash |
| Available transmit power settings |
2.4 GHz |
| 23 dBm (200 mW) |
| 20 dBm (100 mW) |
| 17 dBm (50 mW) |
| 14 dBm (25 mW) |
| 11 dBm (12.5 mW) |
| 8 dBm (6.25 mW) |
| 5 dBm (3.13 mW) |
| 2 dBm (1.56 mW) |
| -1 dBm (0.79 mW) |
| -4 dBm (0.39 mW) |
| 5 GHz |
| 26 dBm (400 mW) |
| 23 dBm (200 mW) |
| 20 dBm (100 mW) |
| 17 dBm (50 mW) |
| 14 dBm (25 mW) |
| 11 dBm (12.5 mW) |
| 8 dBm (6.25 mW) |
| 5 dBm (3.13 mW) |
| 2 dBm (1.56 mW) |
| -1 dBm (0.79 mW) |
| -4 dBm (0.39 mW) |
| Frequency band and 20-MHz operating channels |
H(H regulatory domain): |
| 2.412 to 2.472 GHz; 13 channels |
| 5.180 to 5.320 GHz; 8 channels |
| 5.745 to 5.825 GHz; 5 channels |
Audited Supplier 
){kind=link}
){kind=link}